What is known from the existing literature about the treatment of mallet injury using 3D printed splits?
Cronin, U., Shannon, A., O’hAodha, M., O’Sullivan, A. Cummins, N.M., and O’Sullivan, L.W., 2024,
A scoping review protocol, HRB Open.
Custom 3D Printed Splint for Postoperative Rehabilitation of a Terrible Triad Elbow Injury
Huszar, A., Thomas, J., Adel, E., Timon, C., O’Sullivan, A., O’Sullivan, L.W. and Cassidy, J.T.,
JESS reviews, Reports and Techniques.
Effects of post-curing duration on the mechanical properties of complex 3D printed geometrical parts
Guttridge, C., Shannon, A., O’Sullivan, A., O’Sullivan, K.J. and O’Sullivan, L.W., 2024,
Journal of the Mechanical Behaviour of Biomedical Materials.
Evaluating the Clinical benefits and acceptance of a bespoke 3D printed splint for the treatment of mallet finger injury: a pilot study in a cohort of patients
Cronin, U., O’Sullivan, A., Sheerin, M., O’Sullivan, K.J., Cummins, N., Ryan, D., O’Sullivan, L.W.,
International Journal of Bioprinting, 10, 1963.
Comparing digital light processing and stereolithography of vat polymerization technologies for antimicrobial 3d printing using silver oxide as an antimicrobial filter
Shannon, A., Guttridge, C., O’Sullivan, A., O’Sullivan, K.J., Clifford, S., Schmalenberger, A., O’Sullivan, L.W.,
Journal of Applied Polymer Science, 141, 1-10.
Assessing the dispersion stability of antimicrobial fillers in photosensitive resin for VAT polymerization 3D printing
Shannon, A., O’Sullivan, A., O’Sullivan, K.J., Clifford, S. and O’Sullivan, L.W., 2023,
3D Printing and Additive Manufacturing.
Rapid repair of percutaneous endoscopic gastrostomy tubes using three-dimensional printing: A case series
O’Sullivan, K.J., O’Sullivan, A., Kermavnar, T., McNally, P., Dunne, C., Linnane, B., and O’Sullivan, L.W., 2023
Annals of 3D printed Medicine, 9.
Tape it up: scientific experiment testing the best taping method for intercostal chest drains
Domanska, K., O’Sullivan, A., Mulcahy, N., Galvin, R., O’Sullivan, L.W., Cummins, F., 2023,
Emergency Medical Journal, 40, 726-727.
Biocompatible 3D printing resins for medical applications: a review of marketed intended uses, biocompatibility certification, and post-processing guidance
Guttridge, C., O’Sullivan, A., O’Sullivan, K.J., and O’Sullivan, L.W., 2023,
Annals of 3d Printed Medicine, 5, 100044.
Assessment and selection of filler compounds for radiopaque Polyjet multi-material 3D printing for use in clinical settings
Shannon, A., Clifford, S., O’Sullivan, K.J. and O’Sullivan, L.W., 2023,
Journal of Engineering in Medicine, 236, 740-747.
Impact of Central Venous Catheters verses Arteriovenous Fistulae on Quality of Life among Haemodialysis Patients
Maguire, I., Browne, L., Dawood, M., Leahy, F., Ryan, M., White, E., O’Sullivan, A., O’Sullivan, L. W., and Austin Stack,
Kidney 360, 3(6) 1065-1072.
The application of 3D printing in Palliative Care: A systematic review
Kermavnar, T., Guttridge, C., Mulcahy, N., Duffy, E., Twomey, F. and O’Sullivan, L.W., 2022,
BMJ Supportive and Palliative Care, 1-10.
Warmed contrast media temperature loss in traditional manifold systems during angiographic procedures
O’Sullivan, K.J., Kermavnar, T. and O’Sullivan, L.W.
Acta Radiologica, 63, 1627-1633
3D printing of medical devices used directly to treat patients: a systematic review
Kermavnar, T., Shannon, A., O’Sullivan, K.J., McCarthy, C., Dunne, C.P., O’Sullivan, L.W., 2021
3D printing and Additive Manufacturing, 8, 366-408.
3D Printed Devices for Healthcare in Response to COVID 19 – Lessons Learned To-Date
Guttridge, C., O’Sullivan, A., O’Sullivan, K.J. and O’Sullivan, L.W., (2021)
3D Printing and Additive Manufacturing
Bespoke 3D Printed Eye Cover for Teen with Rhabdomyosarcoma
O’Sullivan, A.G., Duffy, E., O’Sullivan, K.J., Cronin, U., Lyons, E., O’Sullivan, L.W., Twomey, F., (2021)
BMJ Supportive and Palliative Care
http://dx.doi.org/10.1136/bmjspcare-2021-002900
A radiopaque nanoparticle-based ink using PolyJet 3D printing for medical applications
Shannon, A., O’Connell, A., O’Sullivan, A.G., Byrne, M., Clifford, S., O’Sullivan, K.J., and O’Sullivan, L.W., (2020)
3D Printing and Additive Manufacturing
https://doi.org/10.1089/3dp.2019.0160
Oscillating Positive Expiratory Pressure Therapy May Be Performed Poorly by Children with Cystic Fibrosis
O’Sullivan, K.J., Collins, L., McGrath, D., Linnane, B., O’Sullivan, L.W., Dunne, C.P., (2019)
Respiratory care
https://doi.org/10.4187/respcare.06329
Children with Cystic Fibrosis May Be Performing Oscillating Positive Expiratory Pressure Therapy Incorrectly
O’Sullivan, K.J., Collins, L., McGrath, D., Linnane, B., O’Sullivan, L.W., Dunne, C.P. (2018)
Chest
https://doi.org/10.1016/j.chest.2018.03.057
Foreseeing the microbiology of bespoke 3D printed medical device
Dunne, C.P., O’Sullivan, K.J., O’Sullivan, L.W., Linnane, B. and O’Connell, N.H., (2018)
Journal of Hospital Infection
https://doi.org/10.1016/j.jhin.2018.03.011
The use of 3D Printing to Create a Bespoke Repair of a Percutaneous Endoscopic Gastrostomy (PEG) Tube in Patient Unfit for Surgical Replacement
O’Sullivan, K.J., O’Sullivan, A.G., Power, N., Gillick, J., Dunne, C.P., O’Sullivan, L.W., Linnane, B., (2018)
BMJ Innovations
http://dx.doi.org/10.1136/bmjinnov-2017-000246
3D printing to create a percutaneous endoscopic gastrostomy tube in patient unfit for surgical replacement
O’Sullivan, K.J., O’Sullivan, A.G., Dunne, C.P., Power, N., O’Sullivan, L.W. and Linnane, B., (2018)
Irish Journal of Medical Science
Preliminary assessment on the effects of line width, layer height and orientation on strength and print time for FDM printing of total contact casts for the treatment of diabetic foot ulcers.
Mulcahy, N., O’Sullivan, K.J., O’Sullivan, A. and O’Sullivan, L.W., 2023.
Annals of 3D Printed Medicine, 11
Assessing the dispersion stability of antimicrobial fillers in photosensitive resin for VAT polymerization 3D printing.
Shannon, A., O’Sullivan, A., O’Sullivan, K.J., Clifford, S. and O’Sullivan, L.W., 2023
3D Printing and Additive Manufacturing, page number pending.
Rapid repair of percutaneous endoscopic gastrostomy tubes using three-dimensional printing: A case series
O’Sullivan, K.J., O’Sullivan, A., Kermavnar, T., McNally, P., Dunne, C., Linnane, B., and O’Sullivan, L.W., 2023
Annals of 3D printed Medicine, 9.
Tape it up: scientific experiment testing the best taping method for intercostal chest drains
Domanska, K., O’Sullivan, A., Mulcahy, N., Galvin, R., Cummins, F., 2023
Emergency Medical Journal, 40, 726-727.
Design and Initial Testing of a Novel Disposable Oscillating Positive Expiratory Pressure Device
O’Sullivan, K.J., Linnane, B., McGrath, D., Dunne, C., and O’Sullivan, L.W., 2023
Irish Journal of Medical Science, 192, 2291-2299.
Biocompatible 3D printing resins for medical applications: a review of marketed intended uses, biocompatibility certification, and post-processing guidance
Guttridge, C., O’Sullivan, A., O’Sullivan, K.J., and O’Sullivan, L.W., 2023
Annals of 3d Printed Medicine, 5, 100044
Assessment and selection of filler compounds for radiopaque Polyjet multi-material 3D printing for use in clinical settings
Shannon, A., Clifford, S., O’Sullivan, K.J. and O’Sullivan, L.W., 2022
Journal of Engineering in Medicine, 236, 740-747
Impact of Central Venous Catheters verses Arteriovenous Fistulae on Quality of Life among Haemodialysis Patients
Maguire, I., Browne, L., Dawood, M., Leahy, F., Ryan, M., White, E., O’Sullivan, A., O’Sullivan, L. W., and Austin Stack, 2022
Kidney 360, 3(6) 1065-1072
The application of 3D printing in Palliative Care: A systematic review
Kermavnar, T., Guttridge, C., Mulcahy, N., Duffy, E., Twomey, F. and O’Sullivan, L.W., 2022
BMJ Supportive and Palliative Care, 1-10
An initial evaluation of the safety of a disposable oscillating positive expiratory pressure device in patients with chronic obstructive pulmonary disease: A sort-term pilot study
O’Sullivan, K., Power, V., Linnane, B., McGrath, D., Fogarty, H., Ryan, M., White, R., Noonan, C., Mulloy, E., O’Sullivan, L.W., and Dunne, C., 2021
BMC Pulmonary Medicine, 21, 326
Warmed contrast media temperature loss in traditional manifold systems during angiographic procedures
O’Sullivan, K.J., Kermavnar, T. and O’Sullivan, L.W., 2022
Acta Radiologica, 63, 1627-1633
Assessment of the microbial load of airway clearance devices used by a cohort of children with cystic fibrosis
Linnane, B., O’Connell, N.H., Obande, E., Dunne, S.S., Clancy, C., Kiernan, M.G., McGrath, D., O’Sullivan, K.J., O’Sullivan, L.W. and Dunne, C.P., 2021
Infection Prevention In Practice, 3, 100153-100162
A short-term evaluation of a prototype disposable Oscillating Positive Expiratory Pressure (OPEP) device in a cohort of children with cystic fibrosis
O’Sullivan, K.J., McGrath, D., Linnane, B., O’Sullivan, L.W. and Dunne, C., 2021
BMC Pulmonary Medicine, 21, 158-167
3D printing of medical devices used directly to treat patients: a systematic review
Kermavnar, T., Shannon, A., O’Sullivan, K.J., McCarthy, C., Dunne, C.P., O’Sullivan, L.W., 2021
3D printing and Additive Manufacturing, 8, 366-408
3D Printed Devices for Healthcare in Response to COVID 19 – Lessons Learned To-Date
Guttridge, C., O’Sullivan, A., O’Sullivan, K.J. and O’Sullivan, L.W., 2021
3d Printing and Additive Manufacturing, 8, 340-342
Bespoke 3D Printed Eye Cover in Rhabdomyosarcoma
O’Sullivan, A.G., Duffy, E, O’Sullivan, K.J, Cronin, U., Lyons, E, O’Sullivan, L.W., Twomey, F., 2021
BMJ Supportive and Palliative Care, epub ahead of print
A radiopaque nanoparticle-based ink using PolyJet 3D printing for medical applications
Shannon, A., O’Sullivan, K.J., Clifford, S. and O’Sullivan, L.W., 2020
3D Printing and Additive Manufacturing, 7, 259-267
Evaluation of a novel disposable oscillating positive expiratory pressure (OPEP) device in a cohort of children with Cystic Fibrosis
O’Sullivan, K.J., Power, V., McGrath, D., Dunne, C., O’Sullivan, L.W., Linnane, B.,
Archives of Disease in Childhood, 104, S3, A146
Oscillating Positive Expiratory Pressure therapy may be performed poorly by children with cystic fibrosis
O’Sullivan, K. J., Collins, L., McGrath, D., Linnane, B., O’Sullivan, L.W. and Dunne, C., 2019
Respiratory Care, 64, 398-405
SoloPep – evaluation of a novel disposable Oscillating Positive Expiratory Pressure (OPEP) device in children with Cystic Fibrosis
O’Sullivan, K.J., Power, V., Dunne, C., McGrath, D., O’Sullivan, L.W., Linnane, B.,
Journal of Cystic Fibrosis, 18, S34
An evaluation of a novel disposable Oscillating Positive Expiratory Pressure (OPEP) device in children with Cystic Fibrosis
O’Sullivan, K.J., Power, V., Dunne, C., McGrath, D., O’Sullivan, L.W., Linnane, B.
European Respiratory Journal, 54, S63
A single arm, practical application assessment of user experience and peristomal skin condition among persons with an ileostomy using a new barrier seal with assisted flow
Kelleher, K., Hunt, R., Hannigan, A., Coffey, C., Moloney, M.C., Ahern, M., Conway, E., O’Sullivan, L.W., 2019
Wound Ostomy Management, 65, 14-19
Evaluation of use behaviour with an oscillating positive expiratory pressure device in paediatric cystic fibrosis patients
O’Sullivan, K., O’Sullivan, L.W., Dunne, C., McGrath, D. and Linnane, B., 2018
European Respiratory Journal, 52, S62
Incorrect performance of Oscillating Positive Expiratory Pressure (OPEP) therapy by children with cystic fibrosis
O’Sullivan, K.J., Collins, L., McGrath, D., Linnane, B., O’Sullivan, L.W. and Dunne, C.P., 2018
Paediatric Pulmonology, 53, 345-346
Changes in peristomal skin condition and user experience of a novel ostomy seal addressing chemical dermatitis: A six-week safety and efficacy study
Hunt, R., Kelleher, K. and O’Sullivan, L.W., 2018
Journal of Wound Ostomy Care Nursing, 45, 444-448
Children with cystic fibrosis may perform Oscillating Positive Expiratory Pressure (OPEP) therapy incorrectly
O’Sullivan, K.J., Collins, L., McGrath, D., Linnane, B., O’Sullivan, L.W., Dunne, C.P., 2018
Chest, 154, 1, 231-232
Foreseeing the microbiology of bespoke 3D printed medical device
Dunne, C.P., O’Sullivan, K.K., O’Sullivan, L.W., Linnane, B. and O’Connell, N.H., 2018
Journal of Hospital Infection, 99, 237-238
The use of 3D Printing to Create a Bespoke Repair of a Percutaneous Endoscopic Gastrostomy (PEG) Tube in Patient Unfit for Surgical Replacement
O’Sullivan, K, O’Sullivan, A., Linnane, B., Power, N. and O’Sullivan, L.W., 2018
British Medical Journal – Innovations, 4, 29-31
3D printing to create a percutaneous endoscopic gastrostomy tube in patient unfit for surgical replacement
O’Sullivan, K., O’Sullivan, A.G., Dunne, C.P., Power, N., O’Sullivan, L.W. and Linnane, B., 2018
Irish Journal of Medical Science, S427-428
-
- School of Architecture and Product Design UL
